Histological Evaluation of the Effect of Alendronate on the Maxillary Bone of Wistar Rats Combined with Orthodontic Movement of Intense Force / Evaluación Histológica del Efecto del Alendronate en el Hueso Maxilar de Ratas Wistar Combinado con Movimiento de Ortodoncia de Fuerzas Intensas

SUMMARY: To evaluate the histological adverse effects of alendronate administered systemically and topically in combination with orthodontic movement by intense force. Thirty-six 24-week-old female Wistar rats, ovariectomized, were used and divided into three groups (n = 12/group): control, locally treated with saline (0.07 ml/kg/week) (group 1) and experimental, treated with alendronic acid systemically (0.07 mg/kg/week) (group 2) and locally (7 mg/kg/week) (group 3). At 14 days, an orthodontic anchor was installed in the right first molar, and a force of 144 cN was applied for 28 days. The samples were processed for histological evaluation. Descriptive statistics, Shapiro-Wilk tests, one-way ANOVA with Bonferroni correction, one-way repeated measures ANOVA and chi-square tests were performed. All tests were statistically significant at p <0.05. The adverse events found in all groups were inflammation and osteoclastic activity. In the bisphosphonate-treated groups, there were statistically significant differences (p = 0.005) in the osteoclastic activity between the two hemiarcates. All rats in group 2 presented paralytic ileus. Compared to local administration, systemic treatment with alendronic acid produces more adverse effects, such as inflammation, fibrinoid necrosis, and osteoclastic activity. During the application of intense forces, it was not possible to show that there is necrosis associated with bisphosphonates.

Evaluar los efectos adversos histológicos del alendronato administrado sistémica y tópicamente en combinación con movimientos ortodóncicos de fuerza intensa. Treinta y seis ratas Wistar hembras de 24 semanas de edad, ovariectomizadas, fueron utilizadas y divididas en tres grupos (n = 12/grupo): control, tratado localmente con solución salina (0,07 ml/kg/semana) (grupo 1) y experimental, tratados con ácido alendrónico por vía sistémica (0,07 mg/kg/semana) (grupo 2) y local (7 mg/kg/semana) (grupo 3). A los 14 días se instaló un anclaje de ortodoncia en el primer molar derecho y se aplicó una fuerza de 144 cN durante 28 días. Las muestras fueron procesadas para evaluación histológica. Se realizó estadística descriptiva, pruebas de Shapiro-Wilk, ANOVA de una vía con corrección de Bonferroni, ANOVA de medidas repetidas de una vía y pruebas de chi-cuadrado. Todas las pruebas fueron estadísticamente significativas con un p <0,05. Los eventos adversos encontrados en todos los grupos fueron inflamación y actividad osteoclástica. En los grupos tratados con bisfosfonatos hubo diferencias estadísticamente significativas (p = 0,005) en la actividad osteoclástica entre los dos hemiarcados. Todas las ratas del grupo 2 presentaron íleo paralítico. En comparación con la administración local, el tratamiento sistémico con ácido alendrónico produce más efectos adversos, como inflamación, necrosis fibrinoide y actividad osteoclástica. Durante la aplicación de fuerzas intensas, no fue posible demostrar que existe necrosis asociada con los bisfosfonatos.

Tomographic evaluation of mandibular buccal shelf in patients with different vertical growth pattern / Evaluación de la placa ósea mandibular en pacientes con diferente patrón de crecimiento vertical

The purpose of this research was the tomographic evaluation of the Mandibular Buccal Shelf (MBS) in orthodontic patients with different vertical growth pattern. An observational, descriptive, cross-sectional and retrospective study was conducted. Tomographic images of patients aged 14 to 40 years were observed and a database was formed with those that met the inclusion criteria. The sample size was 10 for each group according to vertical growth pattern (hypodivergent, normodivergent and hyperdivergent). Then four zones of frequent insertion of extralveolar mini-screws were selected in the MBS, taking as a reference the mesial and distal roots of the first and second mandibular molar. When comparing the characteristics of MBS between vertical growth patterns, between sexes and hemiarchs, no statistically significant differences were found. However, when the characteristics of MBS were compared according to the reference root, it was found that there were statistically significant differences. The vestibular area to the distal root of the second mandibular molar presented the highest values in terms of angulation, height and thickness. There are no significant differences in the bone characteristics of MBS according to vertical growth patterns, sexes or hemiarchs. Angulation, height and thickness progressively increase from the vestibular bone of the mesial root of the first mandibular molar to the distal root of the second molar.

El propósito de esta investigación fue la evaluación tomográfica de la placa ósea mandibular (POM) en pacientes de ortodoncia con diferente patrón de crecimiento vertical. Se realizó un estudio de tipo observacional, descriptivo, transversal y retrospectivo. Se observó imágenes tomográficas de pacientes de 14 a 40 años de edad y se formó una base de datos con las que cumplían los criterios de selección. El tamaño de muestra fue de 10 para cada grupo según patrón de crecimiento vertical (hipodivergentes, normodivergentes e hiperdivergentes). Luego se seleccionaron cuatro zonas de inserción frecuente de minitornillos extralveolares en la POM, tomando como referencia las raíces mesial y distal del primer y segundo molar mandibular. Al realizar la comparación de las características de la POM entre patrones de crecimiento vertical, entre sexos y hemiarcadas no se encontraron diferencias estadísticamente significativas. Sin embargo, cuando se comparó las características de la POM según la raíz de referencia se encontró que había diferencias estadísticamente significativas. La zona vestibular a la raíz distal de la segunda molar mandibular presento los mayores valores en cuanto angulación, altura y grosor. No existen diferencias significativas en las características óseas de la POM según patrones de crecimiento vertical, sexos o hemiarcadas. La angulación, la altura y el grosor aumenta progresivamente desde el hueso vestibular de la raíz mesial del primer molar mandibular hacia la raíz distal del segundo molar.

Stress distribution in lower second molar mesialization using mini-implants: a pilot study using 3D finite element analysis / Distribuição de tensões na mesialização do segundo molar inferior usando mini-implantes: um estudo piloto usando análise de elementos finitos 3D

Objective: to analyze the stress distribution in a 3D model that simulates second molar mesialization using two different types of mini-implants. Material and Methods: a mandible bone model was obtained by recomposing a computed tomography performed by a software program. The cortical and trabecular bone, a lower second molar, periodontal ligament, orthodontic tube, resin cement and the mini-implants were designed and modeled using the Rhinoceros 4.0 software program. The characteristics of self-drilling orthodontic mini-implants were: one with 7 mm length, 1 mm transmucosal neck section and 1.6 mm diameter and another with 5 mm length and 1.5 mm diameter. A total of 235.161 and 224.505 elements were used for the mesh. These models were inserted into the bone block and then subjected to loads of 200 cN (centinewton). The results were calculated and analyzed by the Ansys 17.0 software program for qualitative verification through displacement and maximum principal stress maps. Results: it was possible to observe that the periodontal ligament presented low displacement and stress values. However, the physiological values presented are among those capable to provide orthodontic movement, with compression and tensile area visualization staggered between 0.1 and -0.1 MPa (megapascal). Conclusion: within the limitations of the study, the mini-implants tested showed similar results where the load on the tooth allowed dental displacement (molar mesialization), with a tendency to rotate it, theoretically allowing the second molar to take the location of the first molar. (AU)

Objetivo: analisar a distribuição de tensões em um modelo 3D que simula a mesialização do segundo molar usando dois tipos diferentes de mini-implantes. Material e Métodos: um modelo de osso mandibular foi obtido por recomposição de uma tomografia computadorizada realizada por um software. O osso cortical e trabecular, um segundo molar inferior, ligamento periodontal, tubo ortodôntico, cimento resinoso e os mini-implantes foram projetados e modelados no software Rhinoceros 4.0. As características dos mini-implantes ortodônticos auto perfurantes foram: um com 7 mm de comprimento, 1 mm de secção transmucosa e 1,6 mm de diâmetro e outro com 5 mm de comprimento e 1,5 mm de diâmetro. Para a malha, foram utilizados 235.161 e 224.505 elementos. Esses modelos foram inseridos no bloco ósseo e então submetidos a cargas de 200 cN (centinewton). Os resultados foram calculados e analisados pelo software Ansys 17.0 para verificação qualitativa por meio de mapas de deslocamento e tensões máximas principais. Resultados: foi possível observar que o ligamento periodontal apresentou baixos valores de deslocamento e tensões. Porém, os valores fisiológicos apresentados são capazes de proporcionar movimentação ortodôntica, com visualização da área de compressão e tração escalonada entre 0,1 e -0,1 MPa (megapascal). Conclusão: dentro das limitações do estudo, os mini-implantes testados apresentaram resultados semelhantes onde a carga sobre o dente permitiu o deslocamento dentário (mesialização do molar), com tendência a girá-lo, permitindo teoricamente que o segundo molar ocupe do lugar do primeiro molar (AU)

Mechanical Properties of Mini-Implants Used in Extra-Radicular Anchorage

ABSTRACT Objective: To evaluate the mechanical properties of mini-implants (MIs) manufactured from stainless steel and compare them with conventional titanium-aluminum-vanadium alloy MIs. Material and Methods: The following groups were formed: G1 (n=24), 8×1.5 mm steel MIs; G2 (n=24), 12×2.0 mm steel MIs; and G3 (n=24), 10×1.5 mm titanium MIs. The 72 MIs were inserted in the infra zygomatic crest region of the maxilla and retromolar trigone in the jaw of 10 pigs. Pull-out, insertion torque, fracture and percussion tests were performed in order to measure the tensile strength, primary stability and fracture strength of MIs. A digital torque gauge was used to measure insertion and fracture torque, a universal mechanical testing machine was used for pull-out testing and a periotest device was used to measure the micromovement of MIs. For morphological and MI component evaluation, scanning electron microscopy (SEM) was performed. D'Agostino & Pearson, Kruskal-Wallis, and Dunn post-hoc and normality tests were used. Results: G2 insertion and fracture torques were significantly higher than G1 and G3 insertion and fracture torques (p<0.05). The pull-out and percussion tests presented similar values among the groups. SEM revealed that the fracture point was predominantly on the fourth thread for steel MIs (G1 and G2) and on the seventh thread for titanium-aluminum-vanadium MIs (G3). Conclusion: The mechanical properties of stainless steel MIs are superior to those of titanium-aluminum-vanadium alloy MIs.

Tratamiento de Clase II, en dentición permanente, con péndulum Pend-X y anclaje esqueletal / Class II treatment, in permanent dentition, with Pend X and skeletal anchorage

El aspecto estético y, en especial, la protrusión marcada, a menudo alientan a los pacientes a so- licitar tratamiento de ortodoncia. El ortodoncista debe decidir, de acuerdo a las características biotipológicas del caso, qué solución es la más conveniente. El presente artículo describe el tratamiento de una paciente adolescente con una maloclusión de Clase II, división 1, en dentición permanente, braquifacial y que, además, presenta estrechez del maxilar superior. Atender en primer término el problema en el plano transversal es de vital importancia, pero asimismo, se debe planificar cómo corregir la Clase II y, si la distalización es el procedimiento indicado para tratarla, el verdadero reto es no perder anclaje. Se presenta un caso clínico tratado con aparato- logía fija y péndulum versión Pend-X (con tornillo de expansión transversal) y anclaje esqueletal(AU)

Aesthetic appearance, and especially marked protrusion, often encourage patients to request orthodontic treatment. The orthodontist must decide, according to biotypological characteristics of the case, which solution is the most convenient. This article describes the treatment of a teen patient with a Class II division 1 malocclusion, in permanent dentition, brachifacial and who also presents narrowness of upper jaw. Addressing the problem in the transverse plane first is of vital importance, but also, it must be planned how to correct Class II, and if distalization is the appropriate procedure to treat it, the real challenge is not to lose anchorage. It is presented a clinical case treated with fixed appliances and pendulum Pend-X version (with a transversal expansion screw) and skeletal anchorage(AU)

Correlation between cortical bone thickness at mini-implant insertion sites and age of patient

ABSTRACT Introduction: Orthodontic mini-implants (MI) are a reliable alternative to provide temporary orthodontic anchorage. Prior to miniscrew insertion, the best approach would be to evaluate each possible insertion site and measure the cortical bone thickness, and verify whether it would provide adequate primary stability. Objective: This study aimed to evaluate the difference in cortical bone thickness in areas of mini-implants insertion in patients of different ages, by means of cone beam computed tomography (CBCT). Methods: The sample of this retrospective study was composed of 123 CBCT scans, which were used to measure cortical bone thickness in the buccal and palatal inter-radicular space in the mesial region of the first permanent molars. These measures were compared by using the Student's t-test, ANOVA/Tukey tests, and Linear regression between male and female subjects, from 12 to 30 years old. Results: No significant difference was found in cortical bone thickness between sex, race and sagittal facial patterns. Significantly higher measurement values were observed in patients older than 12 years of age at all sites evaluated. The coefficient β at the adjusted linear regression analysis showed that at each increment in age, mean cortical thickness values increased by 0.06mm in the mandible, 0.03mm in the buccal region and 0.02mm in the palatal region of the maxilla. Conclusions: The increase in cortical bone thickness was positively associated with age; that is, the more advanced the patient's age was, the less chance there was of failure due to primary stability.

RESUMO Introdução: Os mini-implantes ortodônticos (MI) são uma alternativa confiável para fornecer ancoragem esquelética temporária. Antes da inserção do mini-implante, a melhor abordagem seria avaliar cada local de inserção possível, medir a espessura do osso cortical e verificar se proporcionaria uma adequada estabilidade primária. Objetivo: O presente estudo teve como objetivo avaliar a diferença na espessura do osso cortical em áreas de inserção dos mini-implantes em pacientes de diferentes idades, por meio da tomografia computadorizada de feixe cônico. Métodos: A amostra desse estudo retrospectivo foi composta por 123 tomografias computadorizadas de feixe cônico, que foram utilizadas para medir a espessura do osso cortical nos espaços inter-radiculares vestibular e palatino na região mesial dos primeiros molares permanentes. Essas medidas foram comparadas por meio dos testes t de Student, ANOVA/Tukey e regressão linear entre os sexos masculino e feminino, de 12 a 30 anos. Resultados: Não houve diferença estatisticamente significativa na espessura cortical, quando comparados sexo, cor da pele e padrão facial sagital. Foram verificadas medidas significativamente maiores em pacientes com idade superior a 12 anos em todos os sítios avaliados. O coeficiente β da análise de regressão linear ajustada mostrou que, a cada incremento da idade, os valores médios da espessura cortical aumentaram 0,06 mm na mandíbula, 0,03 mm na região vestibular e 0,02 mm na região palatina da maxila. Conclusão: O aumento da espessura do osso cortical teve associação positiva com a idade, ou seja, quanto mais avançada a idade do paciente, menor a chance de falha, devido à estabilidade primária.

Efficacy of vertical control by using mini-implant anchorage in maxillary posterior buccal area for Angle class Ⅱ extraction patients / 北京大学学报(医学版)

OBJECTIVE@#To investigate the efficacy of vertical control by using conventional mini-implant anchorage in maxillary posterior buccal area for Angle class Ⅱ extraction patients.@*METHODS@#Twenty-eight Angle class Ⅱ patients [9 males, 19 females, and age (22.6±2.8) years] were selected in this study. All of these patients were treated by using straight wire appliance with 4 premolars extraction and 2 mini-implant anchorage in maxillary posterior buccal area. In this study, the self-control method was used to measure and analyze the lateral radiographs taken before and after orthodontic treatment in each case, the main cephalometric analysis items were related to vertical changes. The digitized lateral radiographs were imported into Dolphin Imaging Software (version 11.5: Dolphin Imaging and Management Solutions, Chatsworth, California, USA), and marked points were traced. Each marked point was confirmed by two orthodontists. The same orthodontist performed measurement on the lateral radiographs over a period of time. All measurement items were required to be measured 3 times, and the average value was taken as the final measurement result.@*RESULTS@#Analysis of the cephalometric radiographs showed that, for vertical measurements after treatment, the differences of the following measurements were highly statistically significant (P < 0.001): SN-MP decreased by (1.40±1.45) degrees on average, FMA decreased by (1.58±1.32) degrees on average, the back-to-front height ratio (S-Go/N-Me) decreased by 1.42%±1.43% on average, Y-axis angle decreased by (1.03±0.99) degrees on average, face angle increases by (1.37±1.05) degree on average; The following measurements were statistically significant (P < 0.05): the average depression of the upper molars was (0.68±1.40) mm, and the average depression of the upper anterior teeth was (1.07±1.55) mm. The outcomes indicated that there was a certain degree of upper molar depression after the treatment, which produced a certain degree of counterclockwise rotation of the mandibular plane, resulting in a positive effect on the improvement of the profile.@*CONCLUSION@#The conventional micro-implant anchorage in maxillary posterior buccal area has a certain vertical control ability, and can give rise to a certain counterclockwise rotation of the mandible, which would improve the profile of Angle Class Ⅱ patients.

Evaluation of the clinical effectiveness of miniscrews in class i and ii malocclusion patients: a systematic review and meta-analysis

Aim: The present systematic review and meta-analysis aimed to evaluate the clinical effectiveness of miniscrews in Class I and II Malocclusion Patients. Methods: From electronic databases, between 2010 and 2020, PubMed, Embase, Cochrane Library, ISI were used to conduct systematic literature. Two reviewers extracted data blindly and independently from the abstract and full text of the studies they used for data extraction. The mean differences between the two groups (miniscrews vs. conventional anchorage) with a 95 % confidence interval (CI), the Inverse-variance method, and the fixed-effect model were calculated. The Meta-analysis was evaluated using the statistical software Stata/MP v.16 (The fastest version of Stata). Results: A total of 186 potentially relevant titles and abstracts were found during the electronic and manual search. Finally, the inclusion criteria required for this systematic review were met by a total of seven publications. The mean difference of molar mesiodistal movement among seven studies and heterogeneity was -0.53 mm (MD, -0.53 95 % CI -0.69, -0.38. P= 0.00) (I2 = 96.52 %). This result showed maximum reinforcement in miniscrews with fewer mesial movements. Conclusion: The result of the current systematic review and meta-analysis shows that miniscrews in patients with class II and I malocclusion help maintain better anchorage preservation than traditional anchorage devices

Resultados del uso de mini-implantes como anclaje para el movimiento de intrusión molar en Ortodoncia / Outcomes on the use of mini-implants as an anchorage in Orthodontics molar intrusion movement

RESUMEN Fundamento: La intrusión dentaria es uno de los movimientos más peligrosos en ortodoncia, para lograrlo se requiere, en ocasiones, del anclaje máximo que ofrecen los mini-implantes. Objetivo: Evaluar el uso de mini-implantes como anclaje en el movimiento de intrusión molar. Metodología: Se realizó un estudio de tipo preexperimental con 6 pacientes que necesitaban intrusión del molar, en la Clínica Estomatológica Provincial de Sancti Spíritus en el periodo de 2011 a 2014. Se utilizaron métodos del nivel teórico y empírico y se estudiaron las variables: estabilidad, ubicación del mini-implante, magnitud de la fuerza, tiempo para lograr el movimiento de intrusión, alteraciones clínicas asociadas y aceptación del paciente. Resultados: Presentaron alta estabilidad de los mini-implantes 3 pacientes y movilidad inferior a 1 mm los 3 restantes. Las complicaciones clínicas más frecuentes fueron la inflamación y el sangrado; el movimiento de intrusión en un tiempo promedio de 8 a 9 meses se logró en 5 pacientes y solo 1 paciente requirió el retiro del mini-implante. El nivel de aceptación por parte de los pacientes fue Medio. Conclusiones: Los resultados del uso de los mini-implantes como anclaje para el movimiento de intrusión molar fueron favorables en los pacientes tratados.

ABSTRACT Background: Tooth intrusion is one of the most dangerous movements in orthodontics, it requires sometimes the maximum anchorage offered by mini-implants. Objective: To evaluate the use of mini-implants as anchorage in molar intrusion movement. Methodology: It was conducted a pre-experimental study with 6 patients who needed molar intrusion, at the Sancti Spíritus Provincial Stomatology Clinic from 2011 to 2014. Theoretical and empirical methods were used and the succeeding variables were studied: stability, mini-implant location, force magnitude, intrusion movement time, associated clinical alterations and patient acceptance. Results: 3 patients showed mini-implants high stability and mobility lower than 1 mm in the remaining 3. The most frequent clinical complications were inflammation and bleeding; intrusion movement was achieved in an average time from 8 to 9 months in 5 patients and only 1 patient required the mini-implant removal. The patient´s level of acceptance was Medium. Conclusions: Outcomes on the use of mini-implants as anchorage in molar intrusion movement were satisfactory in the treated patients.

Anclaje esquelético para el tratamiento de las anomalías de clase II y mordida abierta anterior: informe de un caso / Skeletal anchorage for the treatment of class II anomalies and anterior open bite: report of a case

El reporte de este caso tiene como objetivo demostrar la utilidad de los anclajes esqueléticos temporarios como son las miniplacas cigomáticas y los microimplantes "buccal shelf" en el tratamiento ortodóncico, en una paciente de 17 años 10 meses de edad, clase II vertical, dólicofacial, con mordida abierta anterior y aumento de la altura facial inferior. Después de la primera fase de tratamiento, siguiendo la secuencia de arcos para completar la alineación, se utilizaron anclajes esqueléticos extrarradiculares con una mecánica de intrusión con fuerzas elásticas durante 10 meses. Se intruyeron sus piezas posteriores superiores e inferiores y se distalizó la arcada superior, corrigiéndose la oclusión. El mentón retrognático y su perfil convexo mejoraron con la autorrotación de la mandíbula (AU)

The objective of this report case is to demonstrate the usefulness of temporary skeletal anchors such as zygomatic miniplates and buccal shelf microimplants in orthodontic treatment, in a 17-year-old 10-month-old, vertical class II, dollicofacial patient with anterior open bite and increased lower facial height. After the first treatment phase, following the arch sequence to complete the alignment, extra-radicular skeletal anchors were used with intrusion mechanics with elastic forces for 10 months. Its upper and lower posterior pieces were intruded and the upper arch was distalized, correcting the occlusion. e retrognathic chin and its convex profile improved with autorotation of the jaw (AU)

Antimicrobial activity of probiotics against oral pathogens around orthodontic mini-implants: an in vitro study

ABSTRACT Objective: The aim of this in vitro study was to evaluate the antimicrobial effect of five types of non-industrialized and industrialized probiotics on biofilms formed around orthodontic mini-implants. The null hypothesis tested was: there is no difference in the antimicrobial effect between the five types of probiotics tested around orthodontic mini-implants. Methods: For the experiment, 120 mini-implants were immersed for seven days in Staphylococcus aureus solution for biofilm formation, and were subsequently plated in culture medium containing probiotics. The mini-implants were divided into six different groups, according to the probiotic used: G1)Lactobacillus casei; G2)Lactobacillus brevis; G3)Lactobacillus rhamnosus; G4) Lactobacillus from fermented milk Yakult®; G5) Lactobacillus from fermented milk Batavito® and G6) without use of probiotic, as negative control. Qualitative and quantitative analyses of all groups were performed using the CFU (colony forming unit) count. Results: The study showed that groups G4 and G6 did not present antimicrobial activity, in comparison to groups G1, G2, G3, and G5 (p< 0.05), which demonstrated antimicrobial activity. Conclusion: The non-commercial probiotic bacteria, Lactobacillus casei and Lactobacillus rhamnosus, as well as commercially available fermented milk Batavito® presented promising results in the reduction of colonization of mini-implants by S. aureus. Therefore, the null hypothesis was rejected.

RESUMO Objetivo: O objetivo do presente estudo in vitro foi avaliar o efeito antimicrobiano de cinco tipos de probióticos não industrializados ou industrializados em biofilmes formados ao redor de mini-implantes ortodônticos. A hipótese nula testada foi: não há diferença no efeito antimicrobiano entre os cinco tipos de probióticos testados em torno dos mini-implantes ortodônticos. Métodos: Para o experimento, as cabeças de 120 mini-implantes foram imersas por sete dias em solução de Staphylococcus aureus para formação de biofilme e, posteriormente, semeadas em meio de cultura contendo probióticos. Os mini-implantes foram divididos em seis grupos diferentes, de acordo com o probiótico utilizado: G1)Lactobacillus casei; G2)Lactobacillus brevis; G3)Lactobacillus rhamnosus; G4) lactobacilos do leite fermentado Yakult®; G5) lactobacilos do leite fermentado Batavito®; e G6) sem uso de probiótico, como controle negativo. As análises qualitativas e quantitativas de todos os grupos foram realizadas usando a contagem de UFCs (unidades formadoras de colônia). Resultados: O estudo mostrou que os grupos G4 e G6 não apresentaram atividade antimicrobiana, em comparação aos grupos G1, G2, G3 e G5 (p< 0,05), os quais demonstraram atividade antimicrobiana. Conclusão: As bactérias probióticas não comerciais, Lactobacillus casei e Lactobacillus rhamnosus, assim como o leite fermentado comercializado, Batavito®, apresentaram resultados promissores na redução da colonização dos mini-implantes por S. aureus. Portanto, a hipótese nula foi rejeitada.

Intrusion of posterior teeth using miniplates: intrusive mechanics is not the same as intrusion force

ABSTRACT Objective: Biologically explain some of the bone mechanisms involved in the intrusion, or intrusive effect, of teeth submitted to skeletal open bite correction using four miniplates. Methods: The results of dental intrusion were measured and compared in 3D reconstructions of cone beam computed tomography scans taken before and after treatment of 20 patients with skeletal open bite, aged between 18 and 59 years. Results: The results allow deducing that the compression and traction forces biologically promoted deformation or deflection of the osteocyte network that controls bone design, and these effects involved the external and internal surfaces of the bone, with the formation of new layers, including the cervical portion of the alveolar bone crest. This helps understanding how dental intrusion occurs in intrusive mechanics, whose forces are of inclination rather than intrusion. The root resorptions caused by the use of miniplates were insignificant, due to the more homogeneous distribution of forces in the several teeth simultaneously involved. Conclusion: Imaging studies in CT scans tend to capture in details the subperiosteal and endosteal phenomena of dental intrusion - before and after the application of intrusive mechanics -, in the form of a set of modifications called dental intrusion or intrusive effect .

RESUMO Objetivo: Explicar, biologicamente, alguns dos mecanismos ósseos envolvidos na intrusão, ou efeito intrusivo, de dentes submetidos à correção da mordida aberta esquelética por meio do uso de quatro miniplacas. Métodos: Foram mensurados, em reconstruções 3D de tomografias computadorizadas de feixe cônico, os resultados da intrusão dentária, comparando-se o antes e o depois em 20 pacientes com mordida aberta esquelética, com idades entre 18 e 59 anos. Resultados: Os resultados permitem deduzir que as forças de compressão e de tração promovem, biologicamente, deformação ou deflexão da rede osteocítica controladora do design ósseo, e esses efeitos envolvem as superfícies externas e internas do osso, com formação de novas camadas, incluindo a parte cervical da crista óssea alveolar. Isso ajuda a compreender como ocorre a intrusão dentária nas mecânicas intrusivas cujas forças são de inclinação, e não de intrusão. As reabsorções radiculares promovidas pelo uso de miniplacas são insignificantes, em função da distribuição mais homogênea das forças nos vários dentes simultaneamente envolvidos. Conclusão: Os estudos imagiológicos tendem a captar, nas tomografias, cada vez mais detalhadamente os fenômenos subperiosteais e endosteais da intrusão dentária nos pacientes - antes e depois da aplicação das mecânicas intrusivas -, na forma de um conjunto de modificações que se chama intrusão dentária ou efeito intrusivo.

Evaluation of the palatal bone in different facial patterns for orthodontic mini-implants insertion: A cone-beam computed tomography study

ABSTRACT Objective: Evaluate the height, thickness and cortical density of the palatal bone of adults with different vertical facial patterns using Cone-Beam Computed Tomography (CBCT). Methods: This study analyzed 75 CBCTs of patients between 18 and 35 years old (45 men and 30 women). The CBCTs were classified into three groups based on their facial pattern: normodivergent, hypodivergent and hyperdivergent as determined from lateral cephalograms synthesized from the CBCTs. The height, cortical thickness and cortical density of the palatal bone were measured at 4, 8, 12, 16 and 20mm posterior to the incisive foramen, and at 3, 6 and 9mm lateral to the midpalatal suture. ANOVA with Tukey post-hoc tests were used for analysis of the data, at significance level of p< 0.05. Results: The hypodivergent pattern had a significant difference and the greatest height and cortical thickness of the palatal bone, followed by the hyperdivergent and the normodivergent patterns. No significant differences were found in minimum and maximum values of cortical density. Conclusion: The palatal bone is a favorable anatomical area to install different orthodontic temporary anchorage devices (TADs), where individuals with the hypodivergent vertical facial pattern have a higher height and cortical thickness of the palatal bone, followed by the hyperdivergent pattern and finally the normodivergent pattern. No significant differences in the cortical density of the palatal bone in the three facial patterns were found.

RESUMO Objetivo: Avaliar a altura, a espessura e a densidade cortical do osso palatino em adultos com diferentes padrões faciais verticais, utilizando a tomografia computadorizada de feixe cônico (TCFC). Métodos: O presente estudo analisou 75 TCFCs de pacientes com idades entre 18 e 35 anos (45 homens e 30 mulheres). As TCFCs foram classificadas em três grupos, de acordo com seus padrões faciais: normodivergentes, hipodivergentes e hiperdivergentes, conforme determinado na radiografia cefalométrica lateral reconstruída das TCFCs. Altura, espessura e densidade cortical do osso palatino foram aferidas a 4, 8, 12, 16 e 20 mm para posterior do forame incisivo e a 3, 6 e 9 mm lateralmente à sutura transpalatina. Os testes ANOVA e post-hoc de Tukey foram utilizados para análise dos dados, com nível de significância de p< 0,05. Resultados: O padrão hipodivergente apresentou uma diferença significativa e a maior altura e espessura cortical do osso palatino, seguido pelos padrões hiperdivergente e normodivergente. Nenhuma diferença estatisticamente significativa foi encontrada nos valores mínimos e máximos da densidade cortical. Conclusão: O osso palatino é uma área anatomicamente favorável para instalar diferentes dispositivos de ancoragem temporária. Indivíduos com padrão facial vertical hipodivergente apresentam maior altura e espessura cortical do osso palatino, seguido do padrão hiperdivergente e finalmente do padrão normodivergente. Não foi encontrada qualquer diferença significativa na densidade cortical do osso palatino entre os três padrões faciais.

Miniscrew-assisted rapid palatal expansion (MARPE): how to achieve greater stability. In vitro study

ABSTRACT Objective: Assess the influence of mono- and bicortical anchorage and diameter of mini-implants (MIs) on the primary stability of these devices. Methods: 60 self-drilling MIs were distributed in six groups according to diameter (1.5mm, 1.8mm or 2.0mm) and type of anchorage (monocortical and bicortical) in bovine rib. The primary stability was evaluated by insertion torque, micromobility and pull-out strength tests. ANOVA and/or Tukey analysis were used to conduct intergroup comparisons (p< 0.05). Non-parametric statistics (Kruskal-Wallis and Mann-Whitney) were performed when normality was not found (p< 0.05). Results: MIs with larger diameters and bicortical anchorage showed greater primary stability regarding insertion torque (p< 0.05) and micromobility (p< 0.05). Only MI diameter had an effect on the pull-out strength test. Larger diameter MIs presented better retention in pull-out strength tests (p< 0.001), regardless of mono- or bicortical anchorage. Conclusions: MI primary stability is dependent on its diameter and type of anchorage. Bicortical anchorage showed greater stability when compared with monocortical anchorage, independently of other variables.

RESUMO Objetivo: Avaliar a influência da ancoragem mono e bicortical e do diâmetro dos mini-implantes (MIs) na estabilidade primária desses dispositivos. Métodos: 60 MIs autoperfurantes foram distribuídos em seis grupos, de acordo com o diâmetro (1,5 mm, 1,8 mm ou 2,0 mm) e tipo de ancoragem (monocortical e bicortical), e inseridos em costela bovina. A estabilidade primária foi avaliada pelos testes de torque de inserção, micromobilidade e resistência à tração. ANOVA e/ou análise de Tukey foram usadas para realizar comparações intergrupos (p< 0,05). Estatística não paramétrica (Kruskal-Wallis e Mann-Whitney) foi realizada quando a normalidade não foi encontrada (p< 0,05). Resultados: MIs com diâmetros maiores e ancorados bicorticalmente apresentaram maior estabilidade primária em relação ao torque de inserção (p< 0,05) e micromobilidade (p< 0,05). Apenas o diâmetro do MI influenciou os resultados do teste de resistência à tração. MIs de maior diâmetro apresentaram melhor retenção nos testes de resistência à tração (p< 0,001), independentemente da ancoragem mono ou bicortical. Conclusões: a estabilidade primária do MI é dependente de seu diâmetro e tipo de ancoragem. A ancoragem bicortical apresentou maior estabilidade quando comparada à ancoragem monocortical, independentemente das demais variáveis.

Stability of immediately loaded 3 mm long miniscrew implants: a feasibility study

ABSTRACT Introduction: Shorter miniscrew implants (MSIs) are needed to make orthodontics more effective and efficient. Objective: To evaluate the stability, insertion torque, removal torque and pain associated with 3 mm long MSIs placed in humans by a novice clinician. Methods: 82 MSIs were placed in the buccal maxillae of 26 adults. Pairs of adjacent implants were immediately loaded with 100g. Subjects were recalled after 1, 3, 5, and 8 weeks to verify stability and complete questionnaires pertaining to MSI-related pain and discomfort. Results: The overall failure rate was 32.9%. The anterior and posterior MSIs failed 35.7% and 30.0% of the time, respectively. Excluding the 10 MSIs (12.2%) that were traumatically dislodged, the failure rates in the anterior and posterior sites were 30.1% and 15.2%, respectively; the overall primary failure rate was 23.6%. Failures were significantly (p= 0.010) greater (46.3% vs 19.5%) among the first 41 MSIs than the last 41 MSIs that were placed. Excluding the traumatically lost MSIs, the failures occurred on or before day 42. Subjects experienced very low pain (2.2% of maximum) and discomfort (5.5% of maximum) during the first week only. Conclusions: Shorter 3 mm MSIs placed by a novice operator are highly likely to fail. However, failure rates can be substantially decreased over time with the placement of more MSIs. Pain and discomfort experienced after placing 3 mm MSIs is minimal and temporary.

RESUMO Introdução: Mini-implantes (MIs) mais curtos são necessários para uma Ortodontia mais eficiente e efetiva. Objetivo: Avaliar a estabilidade, torque de inserção e de remoção e dor associada a MIs de 3mm instalados em humanos por um ortodontista principiante. Métodos: 82 MIs foram instalados na região vestibular da arcada superior de 26 adultos. Pares de mini-implantes adjacente receberam carga imediata de 100g. Após 1, 3, 5 e 8 semanas, os pacientes foram reavaliados para verificar a estabilidade e preencher um questionário sobre a dor e o desconforto relacionados aos MIs. Resultados: A taxa geral de falhas foi de 32,9%, sendo de 35,7% para os MIs anteriores e 30% para os MIs posteriores. Excluindo os 10 MIs que foram perdidos por trauma (12,2%), a taxa de falha nas regiões anterior e posterior foram de 30,1% e 15,2%, respectivamente e ocorreram no 420 dia ou antes. A taxa geral de falha primária foi de 23,6%. A taxa de falha foi significativamente maior (p=0,010) nos primeiros 41 MIs do que nos 41 últimos (46,3% vs. 19,5%). As experiências relacionadas à dor foram baixas (2,2% máximo), assim como ao desconforto (5,5% máximo) durante a primeira semana. Conclusão: MIs de 3mm instalados por um novato são mais propensos a falhas. Porém, as taxas de falha podem diminuir substancialmente com a instalação de mais MIs com o decorrer do tempo. A dor e o desconforto após a instalação desses dispositivos são mínimos e temporários.

Without mini-plates, mini-implants and surgery: treatment of severe anterior open bite in an adult patient: a case report

Currently, there is a tendency to treat open bite with mini-implants, miniplates, and orthognathic surgeries and build ups when these protocols are not always indicated and to be apply them unnecessarily and excessively. Objectives: This case report describes treatment of a severe anterior open bite in an adult patient with step bends and vertical elastics. Case report: The female patient was 29 years and 8 months old and reported that she had low self-esteem; therefore, she wanted to have her untreated open bite closed. By examination, a convex profile, vertical growth pattern, dental midline deviation, and tongue exposure could be seen upon smiling. The dental and skeletal sagittal relationship was Class II. The overjet was +5 mm and the anterior overbite was -5.5 mm. The severe skeletal open bite involved the first molars to the anterior teeth, and it was treated only with step bends and vertical elastics over 2 years. Results: Significant facial improvement, maxillary incisor exposure upon aesthetic smiling, and adequate overbite and overjet were observed. The upper and lower dental midlines fit to the sagittal line. A counterclockwise rotation of the mandible was observed. The severe skeletal open bite was treated. Conclusions: Severe skeletal open bite malocclusion treated with step bends and vertical elastics in adult patient demonstrated efficient, predictable and stable open bite correction.

Introdução: Atualmente, existe uma tendência de tratar a mordida aberta com mini-implantes, miniplacas, cirurgias ortognáticas e levantes de mordida, quando estes protocolos nem sempre são indicados e a sua aplicação pode ser desnecessária e excessiva. Objetivo: Este relato de caso descreve o tratamento de uma mordida aberta anterior grave em paciente adulto com "step bends" e elásticos verticais. Relato do caso: A paciente tinha 29 anos e 8 meses de idade e relatou ter baixa autoestima; portanto ela queria fechar sua mordida aberta não tratada. Ao exame, um perfil convexo, padrão de crescimento vertical, desvio da linha média dental e exposição da língua podiam ser vistos ao sorrir. A relação sagital dental e esquelética era de Classe II. O overjet de +5 mm e o overbite anterior de -5,5 mm. A mordida aberta esquelética grave envolveu os primeiros molares até os dentes anteriores e foi tratada apenas com "step bends" e elásticos verticais por pouco mais de 2 anos. Resultados: Melhoria facial significativa, exposição dos incisivos superiores ao sorriso estético, sobremordida e overjet adequados foram observadas. As linhas médias dentárias superior e inferior adequadas à linha sagital. Foi observada rotação da mandíbula no sentido antihorário. A mordida aberta esquelética grave foi tratada. Conclusão: A má oclusão grave da mordida aberta esquelética tratada com "step bends" e elásticos verticais em pacientes adultos demonstrou correção eficiente, previsível e estável da mordida aberta.

Treatment of bimaxillary protrusion using intra- and extra-alveolar miniscrews associated to self-ligating brackets system

ABSTRACT Introduction: Moderate and severe bimaxillary protrusion impair the passive lip sealing and the facial and smile esthetics. The extraction of premolars can be avoided by the use of skeletal anchorage to retract both dental arches. This approach brings many advantages such as: prevents premolars extraction; simplifies orthodontic mechanics; there is no volume reduction of a premolar when smiling; control of overbite and gingival exposure. The utilization of this therapeutic approach, when associated with self-ligating brackets, can bring the possibility of spacing the appointments without damage to the treatment efficiency, and allows selection of the most appropriate torque prescriptions for each case. The intra-alveolar miniscrews are indicated for mild cases of bimaxillary protrusion, while extra-alveolar miniscrews may also be indicated for more severe cases. Objective: To report the treatment of three cases of mild, moderate and severe bimaxillary protrusion, in which intra- and extra-alveolar miniscrews were used, according to the retraction required. Conclusion: The retraction of both upper and lower dental arches using orthodontic intra- and extra-alveolar miniscrews, associated with self-ligating brackets, is an excellent tool to correct mild to severe bimaxillary protrusion, thus reducing the need of premolar extraction and simplifying the orthodontic management.

RESUMO Introdução: As biprotrusões moderadas e severas dificultam o selamento labial passivo, comprometem a estética facial e do sorriso. As extrações de pré-molares podem ser evitadas quando se utiliza a ancoragem esquelética como recurso para retrair ambas as arcadas. Essa abordagem traz as seguintes vantagens: evita que o paciente seja submetido ao processo da extração dos pré-molares; simplifica a mecânica ortodôntica; não reduz o volume de um pré-molar de cada lado no sorriso; e auxilia no controle da sobremordida e da exposição gengival. A utilização dessa terapêutica, quando associada aos aparelhos autoligáveis, possibilita maiores intervalos entre as consultas, sem comprometer a eficiência do tratamento, e permite a seleção dos torques mais adequados para essa mecânica. Os miniparafusos intra-alveolares podem ser utilizados na correção de biprotrusões mais suaves, enquanto os extra-alveolares podem ser indicados, também, nos casos mais severos. Objetivo: Relatar os tratamentos de três casos clínicos de biprotrusão leve, moderada e severa, respectivamente, efetuando a retração das arcadas em uma única fase, utilizando miniparafusos intra- e extra-alveolares, conforme a magnitude da retração necessária. Conclusão: A retração das arcadas superior e inferior com miniparafusos ortodônticos intra- e extra-alveolares associados aos aparelhos autoligáveis é um excelente recurso para a correção das biprotrusões de suave a severa, diminuindo a necessidade de extrações de pré-molares e simplificando a mecânica ortodôntica.

Treatment of adult patient with hyperdivergent retrognathic phenotype and anterior open bite: report of a case with non-surgical orthodontic approach

ABSTRACT Adult patients with anterior open bite and hyperdivergent retrognathic phenotype demand complex treatments, as premolar extractions, molar intrusion or orthognathic surgery. In the present clinical case, a young adult patient without significant growth, with Class I and anterior open bite, was treated with four premolar extractions. The therapeutic result shows good intercuspation, good facial esthetic, good function balance, and stability in a two-year post-fixed treatment follow-up.

RESUMO Pacientes adultos com mordida aberta anterior e fenótipo hiperdivergente retrognata demandam tratamentos complexos, com extrações de pré-molares, intrusão de molares ou cirurgia ortognática. No presente caso clínico, uma jovem adulta sem potencial significativo de crescimento, apresentando Classe I e mordida aberta anterior, foi tratada com extrações de quatro primeiros pré-molares. O resultado terapêutico alcançou boa intercuspidação, boa estética facial e bom equilíbrio funcional, e mostrou-se estável depois de dois anos da remoção do aparelho fixo.

Negligible tooth resorptions after anterior open bite treatment using skeletal anchorage with miniplates

ABSTRACT Introduction: When miniplates are used as anchoring for orthodontic mechanics for anterior open bite correction by retraction of anterior teeth and posterior teeth intrusion and retraction, orthodontically induced inflammatory external apical root resorption is clinically negligible. Methods: A homogeneous sample of 32 patients was used, and the roots of the teeth were compared on CT scans performed before and after orthodontic treatment. Results: The observed root resorption was minimal, and this can be explained by the uniform distribution of forces in several teeth, simultaneously, in the set of the dental arch and in the bone that supports the teeth. Conclusion: The most important thing to prevent root resorption in orthodontic practice, besides being concerned with the intensity of the applied forces, is to be careful with its distribution along the roots of each tooth, in the dental arch and in the bone that supports the teeth.

RESUMO Introdução: Quando são utilizadas miniplacas como ancoragem para a mecânica ortodôntica de correção da mordida aberta anterior por meio da retração dos dentes anteriores e intrusão e retração dos dentes posteriores, as reabsorções radiculares apicais externas inflamatórias induzidas ortodonticamente são clinicamente irrelevantes. Métodos: Usou-se uma amostra homogênea de 32 pacientes, e comparou-se as raízes dos dentes em tomografias realizadas antes e depois do tratamento ortodôntico. Resultados: As reabsorções radiculares observadas foram mínimas, e isso pode ser explicado pela distribuição uniforme das forças em vários dentes, simultaneamente, no conjunto da arcada dentária e no osso que suporta os dentes. Conclusão: O mais importante para se prevenir as reabsorções radiculares na prática ortodôntica, além de se preocupar com a intensidade das forças aplicadas, é tomar cuidado com a sua distribuição ao longo das raízes de cada dente, na arcada dentária e no osso que suporta os dentes.